ARTU100 Series Remote Terminal Units
ARTU100 Series Remote Terminal Units
● RS485 (MODBUS -RTU)
● Channel state indicator and communication state indicator
● 24VDC (±10%); 220VAC, allow AC/DC 85~265V
● 2-way 10-100mbits adaptive Ethernet communication, support IPV4, IPV6.
② COM: Communication lights
③ EXT: Module communication light
④ Number of channels(Odd numbers are red lights,
even numbers are green lights)
2. Support Web page parameter configuration,UDP broadcast,SNMMP network management,DHCP automatic access IP.
3. It can realize 8-way Sever/Client function,and realize 8-way client connection or 8-way server connection at the same time.
4. 8-way RS485 communication, baud rate support 1200-115200 can be set, data bit, check bit, stop bit can be set;each 485 can be connected to 30 meters.
5. The protocol conversion between MODBUS TCP and MODBUS RTU can be realized.
04 Application
|
PQWER SUPPER |
AC/DC 85-265V 、 DC48V |
||
|
POWER CONSUMPTION |
≤9W (excluding modules); ≤15W (including modules, up to 3 modules) |
||
|
MODEL |
ARTU100-K32 |
32-path DI (active/passive, optional) |
|
|
ARTU100-K16 |
16-path DI (active/passive, optional) |
||
|
ARTU100-KJ8 |
8-path DI (active/passive, optional); 8-path DO, output mode: relay normally-open contact output, contact capacity; AC 250V/3A DC 30V/3A; |
||
|
COMUMICATION |
485 communication |
RS485 interface |
2-path 485 communication; Modbus-RTU protocol;baud-rate 1200 ~ 38400bps |
|
OTHER |
Dial switch |
10 bits |
|
|
Indicator light |
20 indicator lights |
||
Related Products
CONTACT US
Contact US
Product Information
Quantity
Unit
Piece
Support order samples, customization, wholesale direct, and complete payment. If the product you look for does not have corresponding customized content, pls fill out the form below to contact us, and we will reply ASAP.