•Communication:RS485 (Modbus-RTU)
•Display:LCD display, set multiplying power
•Rated U & I:AC voltage: AC 100V, 220V, 380V
04 Network
Technical Parameter |
Value |
|
|
Rated Value |
AC voltage:Single phaseAC 100V,400V |
Overload |
Voltage: 1.2 times rated value(continuous); 2 times rated value /1 second |
|
Frequency |
45Hz~65Hz |
|
Power Consumption |
Power consumption of each voltage,current input circuit is less than 0.5VA |
|
Accuracy |
Class 0.5 |
|
Function |
Display |
LED or LCD |
Communication |
RS485,Modbus-RTU protocol;(1 start bit,8 data bit,1 stop bit,no parity) |
|
Alarm |
1 channel passive relay,contact capacity 3A/30VDC,3A/250VAC, Used for high,low,unbalance alarm etc. |
|
Analog |
DC4~20mA,( load <500Ω) |
|
Switching |
Input:4 channel or 2 channel dry contact Input,built in power supply |
|
Auxiliary Supply |
AC/DC 85-265V |
|
Power Consumption |
<5VA |
|
Insulation resistance |
≥ 100MΩ |
|
Power frequency withstand voltage |
Between power supply set of terminals and signal input,output set of terminals 2kV/1min (RMS) |
|
|
Temperature |
Operation: -10℃~+55℃Storage: -25°C ~+70°C |
Humidity |
≤95%RH,no condensation,without corrosive gas |
|
Altitude |
≤ 2500m |